Burton Mens Snowboard Boots Ion Black Grey

Availability: In stock

$429.95

SKU# 12/ION_BLKGRY

$429.95

* Required Fields

Quick Overview

Burton Mens Snowboard Boots Ion Black Grey
Burton Mens Snowboard Boots Ion Black Grey

ZoomRollover image to zoom

More Views

Details
The only choice for riders like Danny Davis, Mark Sollors, and Charles Reid, it’s legendary for its aggressive response and stacked tech package. At the top of the list are AutoCANT EST® soles for natural lower body alignment that reduces fatigue and creates a closer feel. Pirelli-rubber treads complete the high-performance feel with Formula One grip.

FEATURES
Shrinkage™ Footprint Reduction Technology
Reduces the boot’s overall footprint one full size, meaning a men’s size 10 fits like a size 10, but has the footprint of a typical size 9. Shorter, lighter, sleeker—never suffer from toe drag again.
Speed Zone™ Lacing System
Lightning fast lacing control. Customize the fit of the upper or lower zone in seconds, and because the system is so powerful, you get more rebound, more wrap, and better response—with less effort. Virtually indestructible, New England Ropes’ laces are the same stuff used by stunt men, firefighters, and rescue teams.
Imprint™ 4 Liner
1. DRYRIDE Moisture Wicking Tech [Men’s Only] 2. Therm-ic Heat Pre-Wired [Women’s Only] 3. Focus Cuff with Velcro® J-Bar Interface and Inner Lace Lock 4. InfiniFIT™ Liner Sole 5. Aegis™ Antimicrobial Coating 7. Lightweight Power Panels 8. Sock Lock 9. Rad Pad for Lace Comfort 10. Velcro® Liner Closure 11. Level 3 Molded EVA Footbed with ESS Support Shank, Dual-Density Cushioning, and Aegis™ 12. Heat-Moldable.
DRYRIDE Hyperwick™
DRYRIDE Hyperwick™ mesh in the toe box both insulates and regulates warmth by pulling moisture away from your skin, then evaporating it through a waterproof/breathable shell membrane. Like a one-way door, the microscopic pores in this membrane allow moisture vapors to escape, while water droplets from the outside can’t enter.
Rad Pad
Located on the top of your instep, right where the liner laces exert the most pressure, these pre-curved panels keep your feet stoked and secure.
InfiniFIT Liner Sole
Fusing a cushioned EVA platform to the footprint of select Imprint™ liners creates a more consistent out-of-box fit that stays true-to-size by preventing pack- out. The supportive platform also improves rebound, comfort, and cushioning for the life of your liners.
EST® Optimized Soles
EST® goes beyond bindings by optimizing the soles on select boots for a more direct connection. Lower-profile, lighter weight, and with a reduced ramp angle, EST lowers your center of gravity and improves feel. All without sacrificing an ounce of cushioning thanks to ultra-dampening B3 Gel inserts.
AutoCANT Cushioning
Dual-density EVA allows your foot to settle into a more natural and relaxed position, resulting in improved comfort, reduced fatigue, and smoother, more direct board control.
Pirelli® Rubber and Snow Tire Tread Inspired Outsole Design
For Formula One grip and feel, we worked with the wizards at Pirelli to develop a new high-performance tire-inspired tread design and race-grade rubber compound.
3D® Molded Tongue
Adjusting the profile of the tongue’s thickness controls its flex, enhances its ability to wrap the foot/ankle/lower/leg, and reduces shell/liner stack-up for improved comfort. Offered in soft, medium, and firm flexing options.
Power Spine Backstay
Allow for fine-tuned medial/lateral support, edge-to-edge response, and durability.
Total Comfort Construction
Get an instantly broken-in feel right out of the box. Total Comfort’s industry-exclusive construction eliminates the break-in period for a fit that feels just as good from shop floor to season opener, and every day thereafter.
Outer Shell Pressure Relief Panel
Ultra-soft gel cushioning is fused to the area where the ankle strap rests on the boot for even pressure distribution when bindings are cranked tight.
Snow-Proof Internal Gusset
All Burton boot tongues feature an internal gusset construction to completely seal the lower zone of the boot, keeping feet warm and dry.
EVA
Lightweight and long-lasting shock absorption.
ESS Support Shank
The added support reduces fatigue while preventing your arch from collapsing on itself when you bomb drop a 40-footer.
Dual-Density Cushioning
Dual-density cushioning uses denser EVA laterally for support, and a softer, more cushioned EVA medially to allow your foot to roll naturally, reducing stress on your joints and ligaments.
Aegis Antimicrobial Coating
Inhibits foul odors. Your feet [and your friends] will thank us. Look for Aegis™ on select liners and footbeds.
Additional Information
Style Number 12/ION_BLKGRY
Manufacturer Burton

Write Your Own Review

You're reviewing: Burton Mens Snowboard Boots Ion Black Grey

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Price
    Value
    Quality
Cancel

* Required Fields

Product Tags

Submit a new tag now and earn 10 Reward points once the tag is approved.

Learn more...

Applies only to registered customers, may vary when logged in.

Use spaces to separate tags. Use single quotes (') for phrases.